Request a security key | Sign up for Duo 2FA| Adding a device | Adding a second device | Configure your device settings |Authenticate using Duo
Prerequisites
To sign up for Duo 2FA, you will need either a mobile phone, tablet, or security key (e.g. YubiKey, U2F).
- If you are using a mobile phone or tablet, download the Duo Mobile app.
- If you are an employee, you can submit a request for a security key instead of using a mobile device for two-factor authentication.
- If you a student, alumni, co-op, contract staff, or retiree, you can purchase a YubiKey or Hardware Tokenthrough Amazon or another vendor instead of using a mobile device for two-factor authentication.
Sign up for Duo 2FA
You canfollow these instructions to add your first two-factor authentication method.
- In your browser, go to the Duo Device Management Portal.
- Enter your WatIAMuserid@uwaterloo.caand your WatIAM password when prompted, then click "Sign in".
- Select the type of devicefrom the list,then click "Continue" to begin adding it.
- Navigate to the instructions for adding your device(s): mobile phone, tablet, or security key.
Addinga device
These instructions explain how to add the various types of devices inDuo.
Mobile phone|Tablet |Security key
Mobile phone
- Go to the Duo Device Management Portal.
- Select your country's area code using the drop down menu and then enter your phone number.
- Verify it is correct, then click"Continue".
- If you haven't already, download the Duo Mobile App on your phone and click "Next".
- Select the type of phone you are using (e.g. iPhone, Android, etc…), then click"Continue".
- In the Duo setup wizard, a QR code will be displayed.
- Open the Duo Mobile App on your mobile phone and select "Use a QR Code".
- You may be prompted to allow access to your camera, select "Allow/OK" and scan the QR code.
- Click "Continue" (This button will be locked until scanning is complete).
- Optionally, configure your device'ssettings.
- Your mobile phone is now set up for two-factor authentication with Duo.
Tablet
- Go to the Duo Device Management Portal
- Select your tablet's operating system (e.g iOS, Android, etc.) then click "Continue".
- In the Duo setup wizard, a QR code will be displayed.
- Open the Duo Mobile App on your tablet and select "Use a QR Code".
- You may be prompted to allow access to your camera, select "Allow/OK" and scan the QR code.
- Click "Continue" (This button will be locked until scanning is complete).
- Optionally, configure your device'ssettings.
- Your tabletis now set up for two-factor authentication with Duo.
Security key (device must support OTP for VPN authentication)
- Go to the Duo Device Management Portal.
- Ensure that pop-up windows are enabled on your computer.
- A prompt will appearto insert and tap your security key immediately after pressing “Continue” in the Duo setup wizard.
- Optionally, configure your device'ssettings.
- Your security keyis now set up for 2FAauthentication with Duo.
Adding multiple devices
If you have already enrolled a device, you can also add anotherdevice as an authentication methodby following the steps below:
- Log intothe Duo Device Management Portal.
- Completethe 2FA prompt using your first device.
- Click"+Add another device"and selectyour device type from the list.
- Navigate to the correct instructions below for your specific type of device: mobile phone, tablet, or security key
Configure your device settings
Select a default device / 2FA method| Reactivate Duo | Change device's name | Delete a device
After you have added one or more devices to your 2FA you can configure your devicesettings using the Duo Device Management Portal. The options available in this portal include:
- Select a default device and two-factor authentication method
- Reactivate Duo in the case you have gotten a new device
- Change your device's name
- Delete your device
Selecta default device/2FA method
Duo can be configuredto automatically send you an authentication request using your preferred authentication method. If the settings of your device are not configuredyou will be asked to choose an authentication method each time you use 2FA.
- In the Duo Device Management Portal where it says "Default Device", select your desired default device from the drop down menu.
- Selectyour desired authentication method from the "When I log in" drop down menu.
- These options will vary depending on what type of device you are using.
- Click the "Save" button.
Reactivate Duo
- In the Duo Device Management Portalclick the blue "Device Options" button beside the device you want to reactivate.
- Click "Reactivate Duo Mobile".
- Follow the correct instructions for your device: mobile phone, tablet, orsecurity key.
Change device name
- In the Duo Device Management Portalclick the blue "Device Options" button beside the desired device.
- Click the blue "Change Device Name"button.
- Enter the desired device name then click the green "Save" button.
Deletea device
- In the Duo Device Management Portalclick the blue "Device Options" button beside the desired device.
- Click the redtrash can icon.
- Click "Remove".
- This action cannot be undone. Please ensure you are removing the correct device.
Authenticate using Duo
Campus VPN | ADFS
Campus VPN
To connect to the campus VPN, you must enter your WatIAM credentials, followed by a second password. Thesecond password defines the second factoryou've chosen.
Second factor | Second password field |
---|---|
Duo push notification | type:push(for multiples, push1 or push2 ...) |
Phone call | type:phone(for multiples phone1 or phone2 ...) |
Test message (SMS) | type:sms(for multiples, sms1 or sms2 ...) |
IST provided YubiKey | place cursor in second password field and touch token (non-IST-providedhardware auth devices must be programmed for OTP and registered with IST) |
Duo hardware token or bypass code | type the passcode in the second password field |
ADFS(Active Directory Federation Service)
When you log in to a university sitesuch as Learn, Portalor, Quest, you are logging in using the ADFS portal. To login, via the ADFS portal, you will needyour WatIAM credentials followed by a successful 2FAauthentication of your login attempt.
To authenticate your login attempt through ADFS:
- Select your preferredmethod of 2FAauthentication. If you have pre-selected a default preferred authentication method in Duo, a 2FArequest will be sent automatically.
- Approve the authentication request using your preferred method.